Live Help

Lower Water Pressure in Alameda

Water Pressure Alameda

For those who start to notice a decrease in water pressure, the condition are usually in your home’s plumbing. Listed below are several of the prevalent things to look for when troubleshooting a low water pressure situation.

Obstructed Aerators

In the event the low pressure is originating from the faucet, the situation could simply be a clogged or congested aerator. Unscrew the faucet ends, and examine the aerator screen for decay, debris, rust or other food crumbs that will be restricting flow. Often it is advisable to simply wash or exchange the aerator altogether.

Decreased Amount of Hot Water

If the drop in water pressure may seem to merely be impacting the hot water, there can be a problem with your water heater. Check the shut-off valve near the hot water heater, ensuring it’s truly opened. You may want to seek advice from a licensed plumber to assess the health of your water heater and see if this is the source of problems of water pressure.

PRV (Pressure Reduction Valve)

If your decreased pressure condition occurs across the home, you should examine your pressure valve. This is usually a bell shaped component, and it is frequently found where the line comes into the dwelling. If your PRV valve was improperly regulated or has failed, it can result in a pressure loss, or even no water flow to the residence.

Shut-Off Valve

A large number of residences and organizations use a master shut off valve. The location may vary, however, most of the time it will probably be located within a separate box beneath the water meter or nearby the pressure reducing valve. This valve, which lets you shut off the flow of water to your home, can minimize the flow if it isn’t entirely open. Although just a bit closed, this valve can restrict flows and reduce your pressure.

Calcium Deposits

For some older residences, water lines like galvanized pipes can often be found. Ultimately, minerals can form inside the water line and thus reduce the inner size in the pipe, in addition to the making of the interior surface of the pipe to be rough. Although this decay does not pose a health threat, this tends to decrease your circulation and water pressure. In case you determine this to be a issue, your only solution is to replace the plumbing in your home with a PEX or copper repipe.

Demands on Your Water System

Generally if the pressure appears slightly lower at certain times during the day, you may be experiencing the effect of a peaking demand in the water system. There are normally a couple of peak periods of time during the day. Some may be first thing in the morning when most people are getting prepared for work or school. And the other is the evening hours when we are coming home from working. During this time period they are sometimes doing laundry, taking a shower, or watering the lawn. With these times, you might notice a decrease in pressure, nevertheless, you should still have adequate water as long as you do not in addition have one of the several difficulties outlined within the other troubleshooting tips.